Was able to get the FT Bushwacker into the air and what a nice Bush Plane.

I Set my throws low and it takes off and lands great. I want to get a bigger motor for 3D and better aerobatics but what a great flying RC Airplane.

I added a couple of vinyl graphics to it and used Dave Brown 2-3/4" wheels.

 

  • Emax BL2215/20 1200kv Outrunner Brushless Motor
  • HURC 40amp ESC
  • Rudders, Elevator and Ailrerons
  • APC 9 X 4.5E Prop
  • Dollar Tree Foam with some packing tape bracing
  • 9 Gram Servos

FT Bushwacker FT Bushwacker RC Bush Plane

If you like to crash allot like I do, The F-16 MK2 is for you. This is such a nice flying plane and a quick build. 

It has a nice profile in the sky and will hover very nicely. The F-16 MK2 uses Leading Edge Slats to help it glide in the air and with Ailerons and Elevons activated it swims throught the air.

I do recommend having the ailerons active full time as this will give you the best performance.

 

  • Power Up 450 Zoom
  • HURC 40amp ESC
  • Rudders, Elevons and Ailrerons (on Switch)
  • APC 6 x 4E Prop
  • Dow Bluecore Foam 
  • 9 Gram Servos

FRCFOAMIES F-16 MK2

What can I say about the SU37 MK2

If you are bored with all the other park jets, the SU37 MK2 is for you.

It took me a few minutes to adjust to it's responsiveness but after that it was a BLAST! I have Ailerons set up at 100% on a switch and as soon as I hit the switch I can perform nice rolls and tight flying.

Also if you are looking for nice inverted flight, this is your bird, with the KF4 airfoils it just flows through the air.

 

  • Power Up 450 Zoom
  • HURC 40amp ESC
  • Rudders, Elevons and Ailrerons (on Switch)
  • APC 6 x 4E Prop
  • Dow Bluecore Foam 
  • 9 Gram Servos
  • KF4 Airfoil

 

 

View the embedded image gallery online at:
http://awdenterprise.com/#sigFreeIdfabb6ae389